Double Coated Tapes, Foams, Films, Papers & Transfer Adhesives

3M™ Double Coated Tapes
Adhesives coated on both sides of paper, film and tissue carriers to increase the dimensional stability of the adhesive for easy handling and application. Adhesives and carriers are combined to provide a variety of properties including high temperature resistance, conformability to irregular surfaces, high initial adhesion, high shear strength and more.

3M™ Double Coated Foam Tapes
Adhesives coated on both sides of urethane, vinyl, neoprene and polyethylene foams ranging in thickness from 16 to 250 mils. Double coated foam tapes are used to fill gaps and distribute stress evenly when bonding rough or irregular surfaces. The result is a bond line that seals, cushions and damps vibration, resists impact, withstands a wide temperature range and provides good insulating qualities.

3M™ VHB™ Tapes
Unique all-acrylic foam construction provides extremely high bond strength to many surfaces under demanding environmental conditions. Provides seals against moisture and most solvents and long term resistance to UV and temperature cycles. VHB Tape distributes stress evenly across the bond line versus mechanical fasteners, allowing the use of thinner, lighter-weight materials with less material fatigue.

3M™ High Performance Bonding Films and Tapes
Typically heat activated films and tapes that provide greater bonds than pressure sensitive adhesives.

3M™ Adhesive Transfer Tapes
Rolls of pressure sensitive adhesive pre-applied to special release liners available with a variety of adhesive properties, including high tack, high temperature resistance and adhesion to low surface energy plastics. Each adhesive family is specially engineered to provide a full range of performance characteristics meeting virtually any application need - from adhering nameplates to low surface energy plastics to keeping appliance faceplates intact at extremely high operating temperatures.

3M™ Removable & Repositionable Tape
A family of double-coated and adhesive transfer tapes designed with various adhesion levels.

3M™ Electronic Switch and Display Adhesives
3M™ Adhesives withstand the constant stress of actuations and remain strong in a variety of environments throughout the life of a switch. These products are specially formulated to provide a tight seal and resist moisture, temperature extremes, ultraviolet radiation and solvents. They offer exceptional cohesive strength with resistance to slippage, oozing, lifting, channeling and buckling.